Pumponator Balloon Pumping Station
Quickly and easily fill balloons with water or air.
-
-
-
-
-
-
-
Watch video for: Pumponator Balloon Pumping Station -
Pumponator Balloon Pumping Station — Blue
-
Pumponator Balloon Pumping Station — Green
-
Pumponator Balloon Pumping Station — Pink
-
Pumponator Balloon Pumping Station — Red
Overview
Water balloon fights are awesome, but trying to fill up your ammo from a faucet or hose typically requires a saint's patience. Forget that hassle and bask in the pure joy of water balloon battles with the Pumponator Balloon Pumping Station.
The 60-ounce dispenser makes it quick and easy to fill balloons. Simply pump the plunger, stretch the balloon over a small nozzle, and pull the trigger to fill.
The Pumponator will fill balloons with water or air. Includes 500 balloons and string for tying.
Features & specs
- Dimensions: 11.5" x 7.5" (4.5" without handle)
- Capacity: 60 ounces
- Includes 500 balloons and tying string
- Ages 8+
- Nozzle diameter: 0.375"
You may also like:
Pumponator fills water balloons easily and quickly
Using a faucet or hose to fill water balloons is fraught with problems. The Pumponator's smaller nozzle (0.375" diameter) makes it easy to fill balloons.
Its pressure-sensitive trigger also allows you to easily control the flow of water to prevent ripped balloons.
Fill water balloons in seconds with the Pumponator Balloon Pumping Station.
You'll be ready for battle with included balloons and string
Each Pumponator Balloon Pumping Station comes with 500 water balloons (in assorted colors) as well as a bundle of tying strings. Now, let's get it on!
Each Pumponator comes with 500 balloons and strings for tying.
Fewer trips to the hose or faucet
With the 60-ounce (1.8L) Pumponator, you can fill about a dozen water balloons before needing to refill.
For children (for whom this product was actually designed...odd, right?), the Pumponator's capacity is perfect because it's not too heavy. A completely full Pumponator weighs less than 4 lbs.
To use the Pumponator, start by pumping the plunger 8-10 times to build pressure. Do not overpump!
Pump the plunger 8-10 times and you're ready to fill a handful of balloons.
Fill balloons faster, easier, with less mess
To fill your balloon, stretch it over the three-eighths-of-an-inch diameter nozzle. Then, depress the trigger to control the flow of water (or air) into your balloon.
By slowly pressing the trigger, you can easily avoid the bursts that make using the hose or faucet so annoying.
Use the pressure-sensitive trigger to fill your balloons with water or air.
Quickly tie-off with the included string
Each Pumponator comes with string for tying your balloons.
Use the following simple technique for a quick and effective tie-off: fold the string in half, wrap around the balloon below the nozzle, and then pull the two ends through the loop. Finally, pull to tighten.
Use the included strings to quickly tie off your balloon.
Choose from four colors
The Pumponator Balloon Pumping Station is available in four colors: red, blue, green, and pink.
 |  |  |  |
| Red | Blue | Green | Pink |
Where can I buy this awesomeness?
Burning Questions: You Ask, We Answer
Want to ask your own Burning Question?
This product is no longer available for purchase directly from Vat19. Therefore, we are no longer accepting new burning questions at this time. Sorry!
Please excuse the shameless cross promotions!
A premium pocket-sized watercolor palette.
A desktop version of the popular advertising device.
A desk decoration with a “Dun-Dun!” sound effect.
A fortune-telling orb that answers yes or no questions with a voice from beyond.
A set of chopsticks capped with tiny hands!